Canon AX-C4343W Technical Document Download Page 36

Page: 36 / 86

Operating procedures

(

: Lighted up,

: Flashing (1 sec. cycles),

: Off)

* Exposure is not possible when the remaining battery level is 4% to 0%, as indicated by flashing.

Turn on the detector.

Press and hold the POWER switch
(for at least 0.5 seconds).

Power LED lamps light up.

When inserting the battery cover, make sure it does not have a bulge in the

middle. If there is a bulge, the dust- and water-protective performance will

deteriorate. Check the shape of the battery cover, and if the inside of the cover

has warped into a curved shape, replace it with a new battery cover.

Make sure that the battery cover is inserted fully.

Make sure that the battery cover is locked securely.

The remaining battery pack charge is indicated by the Power LED lamps of the

detector when the detector is turned on.

Power

LED

Remaining

battery

charge

100% to 76% 75% to 51% 50% to 26%

25% to 5%

4% to 0%*

Important

Information

4.2

Operating the detector

POWER switch

READY LED

Power LED

000_DIA-2019-019-E03_AX-C4343W.book Page 36 Friday, November 27, 2020 12:38 PM

Summary of Contents for AX-C4343W























































































Search results

Summary of Contents for AX-C4343W

Reviews:

Related manuals for AX-C4343W

Brands by name

Popular brands

Canon AX-C4343W, Technical Document

Search results

Summary of Contents for AX-C4343W

Reviews:

Related manuals for AX-C4343W

Brands by name

Popular brands