Canon AX-C4343W Technical Document Download Page 41

Page: 41 / 86

Operating procedures

Remove the battery pack.

Remove the battery cover.

• See

in step 2 of “4.1 Preparing to use the detector” for operating procedures.

ii)

Remove the battery pack.

• Insert your fingers into the slot of the

battery pack bay to grip the battery
pack edge, and then pull the edge to
remove the battery pack (

iii)

Attach the battery cover.

• See

iii)

in step 2 of “4.1 Preparing to

use the detector” for operating
procedures.

Place the detector in its storage location.

The indication of the Power LED lamps changes according to the remaining battery charge
(

➞

page 36).

** Only after linkage from the detector

4.4

List of detector status indication

Detector status

Status indicators

Power LED*

READY LED

Power OFF

Not illuminated

Power ON

Illuminated

Not illuminated

Linkage started

Illuminated

Flashing (3 sec. only)**

Switching to exposure ready status

Illuminated

Flashing

Exposure ready status

Illuminated

Detector selection status (Sleep)

Illuminated

Not illuminated

Error

Flashing

000_DIA-2019-019-E03_AX-C4343W.book Page 41 Friday, November 27, 2020 12:38 PM

Summary of Contents for AX-C4343W























































































Search results

Summary of Contents for AX-C4343W

Reviews:

Related manuals for AX-C4343W

Brands by name

Popular brands

Canon AX-C4343W, Technical Document

Search results

Summary of Contents for AX-C4343W

Reviews:

Related manuals for AX-C4343W

Brands by name

Popular brands