30
The battery pack supplies power to the detector during wireless connection. Be sure to
fully charge the battery before use.
Inserting the detector into the Docking Station lets you charge the battery pack in the
detector as well as configure the connection settings of the control system.
The battery charger is designed for the dedicated battery pack.
For details, refer to the user’s manuals for the battery pack, the Docking Station and the
battery charger.
When the detector is set in a bucky stand or table, the LED lamps on the detector are no
longer visible. However, the status indicator can be used to display the power and
exposure ready status indicated on the detector’s LED lamps. In addition, you can turn the
detector on and off by pressing the POWER switch on the status indicator, or switch the
detector to exposure ready status by pressing and holding the READY switch on the status
indicator. You can attach the status indicator in a place where it can be easily checked
during examination. For details, refer to the user’s manual for the Multi Box.
The ready indicator is connected to the image-capture computer via USB and is attached
using the hook-and-loop fastener in a place where it can be easily seen.
The LED lamps on the detector light up when the detector is in exposure ready status.
As the available image-capturing time (maximum 10 minutes) after the detector is changed
to exposure ready status, is reduced to 5 minutes remaining, 1 minute remaining and 10
seconds remaining, or when the X-rays are received by the detector, the detector beeps,
or the LED lamps on the detector light up or flash. The volume can be controlled or set to
mute.
This unit is used as an interface of the image-capture computer for infrared
communication with the detector, which registers the detector to the control system or the
laptop computer.
3.4
Battery pack / Docking Station /
Battery charger
3.5
Status indicator
3.6
Ready indicator
000_DIA-2019-019-E03_AX-C4343W.book Page 30 Friday, November 27, 2020 12:38 PM
Summary of Contents for AX-C4343W
Page 6: ...Conventions 6 000_DIA 2019 019 E03_AX C4343W book Page 6 Friday November 27 2020 12 38 PM ...
Page 51: ...7 Maintenance 000_DIA 2019 019 E03_AX C4343W book Page 51 Friday November 27 2020 12 38 PM ...
Page 53: ...8 Specifications 000_DIA 2019 019 E03_AX C4343W book Page 53 Friday November 27 2020 12 38 PM ...
Page 85: ...000_DIA 2019 019 E03_AX C4343W book Page 85 Friday November 27 2020 12 38 PM ...