Canon 3814B004 - EOS 7D Digital Camera SLR Instruction Manual Download

Page: 139 / 296

139

If you press the <

>, <

>,<

>, or <

> button

during Live View shooting, the setting screen will appear on the LCD
monitor and you can turn the <

> or <

> dial to set the respective

function. The <

> metering mode cannot be set.

During Live View shooting, you can press the <

> button to set the

Auto Lighting Optimizer and image-recording quality. And with

you can select the AF point and set the AF area selection mode.

Press the <

> button.



The settable functions will be
highlighted in blue.



When <

> is selected, the AF

points will also be displayed.

Select a function and set it.



Use <

> to select a function.



The setting of the selected function is
displayed at the bottom.



Turn the <

> or <

> dial to

change the setting.



When the selection of the AF point is
enabled, the AF area selection mode
for <

> can be selected with the

> button.

Shooting Function Settings

Settings

Quick Control



The metering mode will be fixed to evaluative metering for Live View shooting.



To check the depth of field, press the depth-of-field preview button.



During continuous shooting, the exposure set for the first shot will also
be applied to subsequent shots.



You can also use a remote controller (sold separately, p.114) for Live
View shooting.

Summary of Contents for 3814B004 - EOS 7D Digital Camera SLR









































































































































































































































































































Search results

Summary of Contents for 3814B004 - EOS 7D Digital Camera SLR

Reviews:

Related manuals for 3814B004 - EOS 7D Digital Camera SLR

Brands by name

Popular brands

Canon 3814B004 - EOS 7D Digital Camera SLR, Instruction Manual

Search results

Summary of Contents for 3814B004 - EOS 7D Digital Camera SLR

Reviews:

Related manuals for 3814B004 - EOS 7D Digital Camera SLR

Brands by name

Popular brands