Canon 3814B004 - EOS 7D Digital Camera SLR Page 92 Instruction Manual Download

Page: 92 / 296

Selecting the AF Area

Select the AF area selection
mode.



Press the <

> button. (

)



Look through the viewfinder and
press the <

> button.



Press the <

> button to change

the AF area selection mode.
By default, the button changes the
mode to single-point AF, Zone AF,
and 19-point AF.

Press the <

> button.

(

)



The 19 AF points will be displayed in
the viewfinder.



If Zone AF has been set, the selected
zone will also be displayed.

Select the AF point.



The AF point selection will change in
the direction you tilt the <

>. If you

press <

> straight down, the center

AF point (or zone) will be selected.



You can also use the <

> and

> dials to select the AF point. The

> dial selects an AF point in the

horizontal direction, and the <

dial selects an AF point in the vertical
direction.

Selecting the AF Area Selection Mode

Selecting the AF Point Manually

With [

C.Fn III -7: Manual AF pt. selec. pattern

], you can set either [

Stops at AF area edges

] or [

1: Continuous

] (p.228).

Summary of Contents for 3814B004 - EOS 7D Digital Camera SLR









































































































































































































































































































Search results

Summary of Contents for 3814B004 - EOS 7D Digital Camera SLR

Reviews:

Related manuals for 3814B004 - EOS 7D Digital Camera SLR

Brands by name

Popular brands

Canon 3814B004 - EOS 7D Digital Camera SLR, Instruction Manual

Search results

Summary of Contents for 3814B004 - EOS 7D Digital Camera SLR

Reviews:

Related manuals for 3814B004 - EOS 7D Digital Camera SLR

Brands by name

Popular brands