Canon 3814B004 - EOS 7D Digital Camera SLR, Instruction Manual

Page: 125 / 296

125
Using Wireless Flash N
5
Select [Wireless func.].

For [ Wireless func. ], select [
0
],
then press <
0
>.
 Under [ Wireless func. ], [ Channel ],
etc., will be displayed.
6
Set [Channel].

Set the channel (1-4) to the same one
as the slave unit.
7
Fire a test flash.

After checking that the slave unit is
ready to fire, go to the screen in step
5 and press the <
A
> button.
 The slave unit will fire. If it does not
fire, check your settings again
(p.123).
8
Take the picture.

Set the camera and take the picture
as you would with normal flash
shooting.

To terminate wireless flash shooting,
set [
Wireless func. ] to [ Disable ].

Test flash can also be used to wake up slave units from auto power off.

Setting [ E-TTL II ] to [ Evaluative ] is recommended.

If you use only one external Speedlite, the [ Firing group ] setting does
not have any effect.

The slave unit is controlled by the built-in flash’s light pulse signal.

Wireless flash will not work if the [Flash mode] is set to [MULTI flash].