Canon 3814B004 - EOS 7D Digital Camera SLR Instruction Manual Download Page 180

Page: 180 / 296

180

Playing Movies

Function

Playback Description

Exit

Returns to the single-image display.

Play

Pressing <

> toggles between play and pause.

Slow motion

Adjust the slow motion speed by turning the <

> dial. The

slow-motion speed is indicated on the upper right.

First frame

Displays the movie’s first frame.

Previous frame

Each time you press <

>, a single previous frame is

displayed. If you hold down <

>, it will rewind the movie.

Next frame

Each time you press <

>, the movie will play frame-by-

frame. If you hold down <

>, it will fast forward the

movie.

Last frame

Displays the movie’s last scene.

Edit

Displays the editing screen (p.181).
Playback position

mm’ ss”

Playback time

Volume

You can adjust the built-in speaker’s (p.17) sound volume
by turning the <

> dial.

The camera may not be able to play movies shot by another camera.



With a fully-charged Battery Pack LP-E6, the continuous playback time
at 23°C/73°F will be as follows: Approx. 3 hr.



During the single-image display, press the <

> button to switch the

shooting information display (p.244).



If you took a still photo when you shot the movie, the still photo will be
displayed for about 1 sec. during the movie playback.



If you connect the camera to a TV set (p.184-185) to playback a movie,
adjust the sound volume with the TV set. (Turning the <

> dial will not

adjust the sound volume.)

Summary of Contents for 3814B004 - EOS 7D Digital Camera SLR









































































































































































































































































































Search results

Summary of Contents for 3814B004 - EOS 7D Digital Camera SLR

Reviews:

Brands by name

Popular brands

Canon 3814B004 - EOS 7D Digital Camera SLR, Instruction Manual

Search results

Summary of Contents for 3814B004 - EOS 7D Digital Camera SLR

Reviews:

Brands by name

Popular brands