manualshive.com logo in svg

Canon 3814B004 - EOS 7D Digital Camera SLR, Instruction Manual

Share
Download
Canon 3814B004 - EOS 7D Digital Camera SLR Instruction Manual Download Page 187

187

You can either select and erase images one by one or erase them in 
one batch. Protected images (p.186) will not be erased.

Once an image is erased, it cannot be recovered. Make sure 
you no longer need the image before erasing it. To prevent 
important images from being erased accidentally, protect it. 
Erasing a RAW+JPEG image will erase both the RAW and 
JPEG images.

1

Playback the image to be erased.

2

Press the <

L

> button.

The erase menu will appear at the 
bottom of the screen.

3

Erase the image.

Turn the <

5

> dial to select [

Erase

], 

then press <

0

>. The image 

displayed will be erased.

By checkmarking the images to be erased, you can erase multiple 
images at one time.

1

Select [Erase images].

Under the [

3

] tab, select [

Erase 

images

], then press <

0

>.

L

 Erasing Images

Erasing a Single Image

3

 Checkmarking <

X

> Images to be Erased in a Batch

Summary of Contents for 3814B004 - EOS 7D Digital Camera SLR









































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands