Canon 3814B004 - EOS 7D Digital Camera SLR, Instruction Manual

Page: 203 / 296

203
Dust which could not be removed by the automatic sensor cleaning can
be removed manually with a blower, etc.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.
1
Select [Sensor cleaning].

Under the [
6
] tab, select [ Sensor
cleaning ], then press <
0
>.
2
Select [Clean manually].

Turn the <
5
> dial to select [ Clean
manually ], then press < 0 >.
3
Select [OK].

Turn the <
5
> dial to select [ OK ],
then press <
0
>.
 In a moment, the reflex mirror will
lockup and the shutter will open.

“ CLn ” will blink on the LCD panel.
4
End the cleaning.

Set the power switch to <
2
>.
3
Manual Sensor Cleaning
N

As the power source, using the AC Adapter Kit ACK-E6 (sold separately)
is recommended.

If you use the battery, make sure it is fully recharged. If a battery grip with
size-AA/LR6 batteries is attached, manual sensor cleaning will not be
possible.