Canon 3814B004 - EOS 7D Digital Camera SLR Instruction Manual Download Page 91

Page: 91 / 296

As default setting, the following three AF area selection modes can be
selected. See the next page for the selection procedure.

Single-point AF (Manual selection)

(p.93)

Select one AF point to focus.

Zone AF (Manual selection of a zone)

(p.94)

The 19 AF points are divided into five zones for
focusing.

Auto select 19-point AF

(p.94)

All the AF points are used to focus. Set in fully-
automatic modes (

With [

C.Fn III -6: Select AF area selec. mode

] (p.228), the following

two AF area selection modes can be added.

Spot AF (Manual selection)

(p.93)

For pinpoint focusing.

AF point expansion (Manual selection)

(p.93)

The manually-selected AF point <

> and adjacent

AF points <

> are used to focus.

Selecting the AF Area

Default AF Area Selection Modes

AF Area Selection Modes Added with Custom Functions

Summary of Contents for 3814B004 - EOS 7D Digital Camera SLR









































































































































































































































































































Search results

Summary of Contents for 3814B004 - EOS 7D Digital Camera SLR

Reviews:

Brands by name

Popular brands

Canon 3814B004 - EOS 7D Digital Camera SLR, Instruction Manual

Search results

Summary of Contents for 3814B004 - EOS 7D Digital Camera SLR

Reviews:

Brands by name

Popular brands