33
8. Change the travel to the location
to the desired position, choosing
between 160mm, 150mm, 140mm,
and 130mm travel options by
positioning the spring perch on one
of the four travel settings. Make
sure the spring perch and glide
ring are connected together so that
the holes in the glide ring and the
grooves in the spring perch allow
air to flow past the piston.
9. Reinstall compression rod
assembly into the stanchion tube
and insert coil seal head past the
retaining ring bore and install
retaining ring. Start with one end
of the retaining ring seated in the
bore and work in a circle to install.
It is extremely important to ensure
the clip is fully seated in to
the bore.
Coil Internal Travel Adjustment
150mm Travel
160mm Travel
140mm Travel
130mm Travel
150mm Travel
160mm Travel
140mm Travel
130mm Travel
8a.
Delrin Glide Ring
Line up ports
8b.
9
Summary of Contents for Helm MKII
Page 1: ...SUSPENSION FORK INSTRUCTION MANUAL...
Page 3: ...2...