Cane Creek Helm MKII, Instruction Manual

Page: 16 / 39

15
WARNING:
The fork can become
lowered when applying downward
force while the negative air equalizer
button is pressed, falsely lowering
the travel of the fork as more air
volume is moved from the positive
chamber to the negative chamber.
If this occurs, press negative air
chamber equalizer button down
and pull up on the uppers of the
fork until full travel is restored.
4. Move sag ring indicator to the
wiper seal of the fork according to
the illustration.
5. Dressed in full riding gear, mount
bicycle via normal descending ride
position. Push down on fork to
cycle travel 3-5 times. Then return
sag ring indicator to the wiper seal
at your sag position.
6. Step off bicycle and measure the
sag O-ring movement distance.
Sag should be set approximately
15-25% of the total fork travel. Set
sag with damper compression
settings fully open to prevent damper
influence during this procedure.
Air Spring Set Up
15-25%
(Example: 24mm-40mm
for 160mm travel)
4.
6.
Wiper Seal