24
Turn counter-clockwise
until adjuster stops
to remove all preload
1. Move the sag ring indicator to the
wiper seal of the fork according
to the illustration. Set sag with
damper compression settings fully
open and coil preload fully open to
prevent influence of factors other
than the spring rate during this
procedure.
2. Dressed in full riding gear, mount
bicycle in normal descending ride
position. Push down on fork to
cycle travel 3-5 times. Then return
sag ring indicator to the wiper seal
at your sag position.
1.
2.
Coil Spring Set Up
Summary of Contents for Helm MKII
Page 1: ...SUSPENSION FORK INSTRUCTION MANUAL...
Page 3: ...2...
