11
Tension Adjuster
1. Remove D-LOC axle from fork by opening
the cam lever, then moving the axle lock
latch to the “unlocked” position and slide
the axle out of the fork.
2. Install front wheel into the dropouts and
insert the D-LOC axle with text “
THIS
SIDE UP
” facing towards the head tube
through the dropout. Use an anti seize or
grease on axle shaft to promote longevity
of axle function.
3. Fully seat the D-LOC axle into the
dropouts and Lock the D-LOC
axle lock latch.
4. Use the tension adjuster to adjust the
axle’s clamp strength and close axle
lever to complete wheel installation.
D-Loc Axle Installation
1.
4.
2/3.
Cam Lever
WARNING:
A properly tensioned
axle preloads the hub bearings so that
the hub of the front wheel has no side to
side movement without overtightening
the axle system. An improperly
tensioned axle, a lever not completely
engaged, or a lever not positioned in the
upward closed position could result in
disengagement of the axle and possibly
causing serious injury or death.
Summary of Contents for Helm MKII
Page 1: ...SUSPENSION FORK INSTRUCTION MANUAL...
Page 3: ...2...