34
10. Reinstall lowers on fork by feeding
fully extended compression rod
and damper rod into holes in the
lowers. Use Blue Loctite on the
threads of the two assemblies.
Tighten rebound knob assembly
with an 18mm wrench to 7Nm.
Tighten compression rod nut with a
13mm wrench to 5Nm.
11. After the fork is completely
reassembled, it is possible that air
pressure may be trapped in the
lowers causing a vacuum. If this
occurs, equalize the air pressure
in the lowers by passing a zip tie
through the wiper seals on both
legs of the fork while the fork is at
full extension.
Coil Internal Travel Adjustment
13mm Torque
Ratchet and socket
Torque to 5Nm
18mm Torque
Ratchet and socket
Torque to 7Nm
10a.
10b
Plastic
zip tie
Wiper seal
Pinch wiper to insert
zip tie past seal
until bottom out
Both sides
Stanchion
11.
Summary of Contents for Helm MKII
Page 1: ...SUSPENSION FORK INSTRUCTION MANUAL...
Page 3: ...2...
