25
3. Step off bicycle and measure the
sag O-ring movement distance.
Sag should be set approximately
10-25% of the total fork travel.
4. If sag used is 20-25% or greater,
consider adding preload to the
spring by turning the adjuster
clockwise. Add preload as
necessary. If sag is more than 25%
after adding the maximum amount
of preload, consider changing the
current spring to a spring with a
stiffer spring rate. If sag is below
10%, consider reducing the spring
rate.
Turn clockwise
to add preload
if needed
1.
2.
Coil Spring Set Up
Too much.
Just Right.
Too little.
*Due to variations in travel, preload, and rider standing position optimal spring rate will vary.
This guide is intended to be used during initial setup and only provides recommendations
Summary of Contents for Helm MKII
Page 1: ...SUSPENSION FORK INSTRUCTION MANUAL...
Page 3: ...2...
