C&S Controls LaserLight 2 Series, Technical Manual

Page: 7 / 37

4 LaserLight2 Technical Manual
1.4 Annunciators
The LaserLight2 remote display uses a set of four high-intensity LED annunciators to provide additional
information about the value displayed. The serial default values for the annunciators are
G & N
and
L & K
.
Parameters for alternative values can be set under the serial menu, port 0.
The Stop/Go version of the LaserLight2 also has arrow and round light annunciators to indicate the different states
of the digital outputs. .
Figure 1-3. Front Panel Display – Stop-N-Go Model Shown
LED Description
GR Gross – Indicates the displayed weight is gross weight
NT Net – Indicates the displayed weight is net weight
lb Pounds – indicates units associated with the displayed value, represents primary and secondary units
kg Kilograms – indicates units associated with the displayed value, represents primary and secondary units
-- Red stop light, green go light and green arrow – indicates the traffic light state on the display. This feature
applies to only the LaserLight 4-SG.
See Section 3.9 on page 24 for additional information
Table 1-2. Annunciators
LED
annunciators
(showing GR for
gross and lb for
pound)