C&S Controls LaserLight 2 Series, Technical Manual, Page: 33 / 37

30 LaserLight2 Technical Manual
5.0 Maintenance
5.1 Error Messages
The LaserLight2 displays an error message when an error occurs. Table 5-1 lists the error messages shown by the
LaserLight2 remote display.
Message Description Cause

Auto Learn error Auto Learn failed

Indicator code Write error; could not save menu settings to the serial EEPROM

Invalid settings Invalid settings upon power up; all settings reset to their default state.

Range Error When the Rice Lake format goes over or under range.

Display Error Data cannot be accurately displayed.

Invalid Data Data is being received, but is not valid.
Table 5-1. Error Messages