Canadiana 1695865, Operator'S Manual

Page: 23 / 296

MAINTENANCE
SERVICE RECOMMENDATIONS
PROCEDURE
FIRST
5
HOURS
BEFORE
EACH
USE
AFTER
EACH
USE
EVERY
5
HOURS
EVERY
10
HOURS
EVERY
25
HOURS
BEGINNING
EACH
SEASON
BEFORE
STORAGE
SAFETY
Check to Make Sure
Auger Blade Stops Within
5 Seconds After Right
Control Lever is Released
✓
Lubricate Control Levers
and Linkages
✓ ✓ ✓
SNOWTHROWER
Check Snowthrower for
Loose Hardware
✓ ✓
Lubricate Hex Shaft and
Chains
✓ ✓
Lubricate Auger Shaft
Fittings
✓ ✓
Lubricate Chute Rotation
Gear and Deflector
Mechanism
✓
Remove All Snow and
Slush off Snowthrower to
Prevent Freezing of Auger
or Controls
✓
Check Tire Pressure
✓
ENGINE
Oil, Check
✓ ✓ ✓
Oil, Change
✓ ✓
Check and Replace Spark
Plug
✓ ✓
NOTE: The warranty on this snowthrower does not cover items
that have been subjected to operator abuse or negligence. To
receive full value from the warranty, operator must maintain
snowthrower as instructed in this manual.
The above Service Recom mendations are supplied to assist the
operator to properly maintain the snowthrower.
23
EMISSIONS CONTROL STATEMENT
Maintenance, replacement, or repair of the emissions control devices and
systems may be performed by any non-road engine repair establishment or
individual. However, to obtain “no charge” emissions control service, the
work must be performed by a factory authorized dealer.