Can-Am 219 002 095, Operator'S Manual

Page: 84 / 196

4.5" DIGITAL DISPLAY
NOTE: Some warning indicators ap-
pear in the display of the multifunction
gauge and function the same as an in-
dicator lamp but do not display when
starting the vehicle.
Telltale Lights - Lower Bar
219001961-709_a
LIGHTS DESCRIPTION
ORANGE - Vehicle
malfunction
BLUE - The high beam
are selected
RED - The engine
temperature is too high.
RED - Parking brake is
engaged or malfunction of
the brake system
Green - Neutral
RED - The battery voltage
too low or problem with the
electrical system
RED - Low engine
oil pressure
Normally ON when engine
is OFF
ORANGE - Low fuel level
ORANGE
Turn on : Malfunction
of the vehicle emissions
control system
Blink : Engine problems,
the limp home mode is
activated. Have the vehicle
serviced immediately.
Icons and Indicators - Multifunction
Display
ICONS AND INDICATORS
Denotes SPORT
mode is selected.
Denotes WORK mode
is selected.
Track kit active (If
equipped)
Settings
The buttons to navigate through
menus are located on the left side of
the LCD display.
Setup
Using LOWER (MENU) button, Select
SETTINGS and hold to enter setting
menu.
Maintenance Reset
NOTE: Only when the maintenance
icon is displayed.
Using LOWER (MENU) button, Select
RES MAINT and hold to reset mainte-
nance.
Fault Codes
NOTE: Only when codes are actives.
Using LOWER (MENU) button, Select
CODES and hold to see actives and oc-
curred fault codes. Fault codes will be
scrolled on the Lower Display.
Unit Selection
This multifunction gauge is factory pre-
set in Imperial units but it is possible to
change it to Metric units.
Using LOWER (MENU) button, Se-
lect
UNITS and hold button to change
units.
Reset Stats
Using LOWER (MENU) button, select
RESET STAT and hold to reset.
82
______________