Can-Am 219 002 095, Operator'S Manual

Page: 136 / 196

MAINTENANCE PROCEDURES
NOTICE
Always use the recom-
mended wheel nuts according to the
type of wheel. Using a different lug
nut could cause damage to the rim
or studs.
vmo2008-001-002_a
TYPICAL — ALUMINUM WHEEL
1. Wheel lug nut (closed end type)
Steering
Steering Inspection
Tie-rod Ends
Place vehicle on a level surface.
Apply parking brake.
Lift vehicle.
Secure vehicle on jack stands.
Inspect tie-rods boot for cracks.
Push and pull the wheels from the front
or rear edge to feel the play.
See an authorized Can-Am dealer if
there is an abnormal play or the boot is
cracked.
WARNING
The tie-rod end must be replaced
if the boot is cracked. The steer-
ing system must be inspected if
abnormal play is detected. See an
authorized Can-Am dealer.
Suspension
Front Suspension Lubrication
Lubricate front stabilizer bar bushings
and suspension arms at grease fit-
tings.
SUSPENSION GREASE
Scandinavia
SYNTHETIC
SUSPENSION
GREASE (EUR)
(P/N 779226)
All other
countries
SYNTHETIC
SUSPENSION
GREASE
(P/N 779163)
Rear Suspension Lubrication
Lubricate rear stabilizer bar links and
pivot bushing at grease fittings.
SUSPENSION GREASE
Scandinavia
SYNTHETIC
SUSPENSION
GREASE (EUR)
(P/N 779226)
All other
countries
SYNTHETIC
SUSPENSION
GREASE
(P/N 779163)
Suspension Inspection
Shock Absorbers
Inspect shock absorber for oil leaks or
other damage.
Check tightness of fasteners.
See an authorized Can-Am dealer as
necessary.
Ball Joints
Place vehicle on a level surface.
Apply parking brake.
Lift vehicle.
Secure vehicle on jack stands.
134
______________