Can-Am 219 002 095, Operator'S Manual

Page: 117 / 196

MAINTENANCE PROCEDURES
NOTICE
Always use ethylene-gly-
col antifreeze containing corrosion
inhibitors specifically for internal
combustion aluminum engines.
Engine Coolant Replacement
Cooling System Draining
Remove console. Refer to
EQUIP-
MENT
.
Remove the coolant reservoir cap.
WARNING
Do not remove the coolant reser-
voir cap if engine is hot.
vmo2012-014-019_b
1. Engine coolant reservoir cap
Unscrew the coolant drain plug and
drain the coolant into a suitable con-
tainer.
vmo2012-012-058_b
1. Coolant drain plug
NOTE: Do not unscrew the coolant
drain plug completely.
570 and 650 Models
Disconnect the lower radiator hose
and drain the remaining coolant into a
suitable container.
NOTE: Take note of hose clamp posi-
tion on the lower radiator hose.
Reinstall lower radiator hose.
Position the radiator hose clamp as
noted during removal.
All Models
Install cooling system drain plug with a
new sealing ring and tighten to specifi-
cation.
TIGHTENING TORQUE
Cooling system
drain plug
9 N•m to 11 N•m
(80 lbf• in to 97 lbf• in )
Bleed cooling system, refer to COOL-
ING SYSTEM BLEEDING .
Cooling System Bleeding
1. Unscrew bleed screws on both
front and rear cylinders.
tmo2011-001-501_a
TYPICAL
1. Front cylinder bleed screw
______________
115