Can-Am 219 002 095, Operator'S Manual

Page: 54 / 196

PRE-RIDE INSPECTION
Pre-Ride Inspection Check List
What to Do Before Starting the Engine (Unpowered Electrical System)
ITEMS TO BE
INSPECTED
INSPECTION TO PERFORM
✔
Engine oil
Check engine oil level.
Coolant Check coolant level.
Brake fluid
Check brake fluid level.
Leaks Check for any leaks under vehicle
Throttle lever Activate throttle lever several times to ensure it operates
freely. It must return to idle position when released
Parking brake Apply parking brake and check if it operates properly
Tires
Check tire pressure and condition. Refer to
SPECIFICATIONS
for values and adjust according to load.
Wheels Check wheels for damage and for abnormal play. Check
that lug nuts and beadlock screws are tightened. Refer to
WHEELS AND TIRES
in
MAINTENANCE PROCEDURES
for torque specification.
Radiator
Check cleanliness of the radiator
Drive shaft boots Check drive shaft boots and protectors condition
Seat Check if operator seat is in place and properly latched
If you transport a cargo, respect the load capacity.
Refer to
LOADING THE CARGO RACKS
.
Ensure cargo is properly secured to the rack
Cargo
If you are pulling a trailer or another equipment:
– Check hitch (if applicable) and trailer ball condition
– Respect the tongue capacity (if applicable) and towing
capacity as indicated on the label affixed to the hitch or
refer to
SPECIFICATIONS
.
– Ensure trailer is properly secured to hitch (if applicable).
Chassis and
suspension Check underneath vehicle for any debris on chassis or
suspension components and clean them properly
Engine air filter Inspect and clean engine air filter
CVT air filter Inspect and clean CVT air filter
52
_______
SAFETY INFORMATION
________