Can-Am 2018 Defender Series, Operator'S Manual

Page: 65 / 187

MULTIFUNCTION GAUGE (ANALOG/DIGITAL)
5) Indicator Lamps
Indicator lamps will inform you of various conditions or problems.
An indicator lamp can flash alone or in combination with another lamp.
INDICATOR LAMP(S) DESCRIPTION
All indicator lamps On
All indicator lamps are activated when ignition
switch is ON and the engine is not started
On
Low fuel
On Check engine
On High engine temperature
On Headlights in the HIGH beam position
On/Flash
Operator seat belt is not properly latched.
Engine output will be limited, reducing
the speed and operability of the vehicle.
Main digital display: FASTEN SEAT BELT
On Work mode activated
On ECO mode activated
6) Multifunction Display
The vehicle speed or the engine revolutions (RPM) can be displayed. See
MODE
(M) BUTTON
in this section.
Important messages can also be displayed. Refer to table below.
If an abnormal engine condition occurs, a message can be combined with a pilot
lamp. Refer to
TROUBLESHOOTING
section for details.
_______________
63