Can-Am 2018 Defender Series, Operator'S Manual

Page: 18 / 187

PRE-RIDE INSPECTION
ITEMS TO BE
INSPECTED
INSPECTION TO PERFORM
✔
Check if seats are properly latched.
Check side nets for any damage. Have
the nets replaced if any damage is found.
Fasten both side nets and confirm that they latch
securely. Use the adjustment strap to tighten the net as
required.
Seats, side nets and
seat belts
Check seat belts for any damage. Fasten seat belts and
confirm that they latch securely.
Accelerator pedal
Press on the accelerator pedal a few times to ensure it
operates freely and it returns to the rest position when
released.
Brake pedal
Press down on the brake pedal and make sure you feel
firm resistance and that it fully returns to position when
released.
Fuel level Check the fuel level.
Mirror(s) Adjust mirror(s) to your preferences.
Heater fan (XT
models with Cab)
Check operation of heater fan. Check air flows out of
every louver (dash-mounted and heater-mounted).
What to Do After the Engine is Started
ITEMS TO BE
INSPECTED
INSPECTION TO PERFORM
✔
Steering
Check if steering wheel operates freely by completely
turning it from side to side.
Ignition switch
Turn the ignition switch to OFF to verify if engine will shut
down. Restart engine.
Shift lever Check operation of shift lever (P, R, N, H and L).
2WD/4WD selector
Check operation of 2WD/4WD selector.
Brakes
Drive forward slowly a few feet and apply brakes. The
brake pedal must feel firm when applied. The pedal must
return to rest position when released. The brakes must
respond adequately to the driver's input.
16
_______
SAFETY INFORMATION
________