Can-Am 2018 Defender Series, Operator'S Manual

Page: 56 / 187

SECONDARY CONTROLS
The differential switch enables locking
of rear differential.
NOTICE
The vehicle must be
stopped to engage or disengage
the differential switch. Mechanical
damage may occur if switch is en-
gaged or disengaged while driving.
The rear differential is locked when
the switch is pushed upwards. The
rear differential is unlocked when the
switch is pushed downwards.
5) ECO/Normal/Work Mode
Switch (If Equipped)
The ECO/normal/work mode switch is
located on the upper console.
It is used to select the ECO, normal or
work mode.
NOTE: The cluster will show the se-
lected driving mode.
tmo2016-010-066_d
1. ECO/normal/work mode switch
The ECO (fuel economy mode) setting
reduces fuel consumption by limit-
ing throttle response and maximum
throttle opening to maintain an optimal
cruising setting.
NOTE: Use ECO mode on bumpy
trails to provide smoother ride con-
ditions.
The normal mode offers no engine
torque reduction as well as a sportier
driving experience
The work mode is optimized to be able
to work with high loads in a smooth
way but still with the full engine torque
available. This mode is also effective
for getting over obstacles and rough
terrain.
6) Winch Switch (If
Equipped)
The winch can be controlled from in-
side and outside the vehicle with the
winch control switch located in the up-
per console.
tmo2016-010-066_e
1. Winch switch
Refer to your winch
GUIDE
included
with your vehicle for proper winch op-
eration.
54
______________