Campbell CR3000 Micrologger, Operator'S Manual, Page: 578 / 644

Appendix A. Info Tables and Settings
578
CalGain()
2
Numeric Y
•
Status table
field: ≈47
Array of floating-point values reporting calibration gain (mV) for each integration / range
combination. Updated by auto self-calibration.
CalSeOffSet
2
()
Numeric Y
•
Status table field:
≈
48
Array of integers reporting single-ended offsets for each integration / range combination.
Updated by auto self-calibration.
CalVolts()
2
Numeric Y
•
Status table field:
≈47
Array of three floating-point values reporting a factory calibrated correction factor for
analog input voltage range ±5000 mV, ±1000 mV, ±200 mV. Updated by auto
(background) calibration. Updates at start up calibration.
CAOOffset()
Numeric Y
•
Status
table field: ≈52
Offset of each active CAO terminal measured at compile time; used when the CRBasic
program sets the CAO to the programmed value. Usual value is near 0.
CardBytesFree Numeric Y
•
Keyboard: Settings (Datalogger)
Number of bytes free on the removable memory card. -1 means no card.
CardStatus String Y
•
Station Status field: Card Status
•
Status
table field: ≈30
Contains a string with the most recent status information for the removable memory card.
Central
Routers()
Numeric
•
Settings Editor: Advanced | Central Routers
Array of eight PakBus addresses for routers that can act as central routers.
CommActive()
Discontinued in OS 28 of CR800, CR1000, CR3000. Never in CR6. Function is replaced
by CRBasic instruction ComPortIsActive().
CommConfig() Discontinued
Comms
MemAlloc
Numeric
•
Settings Editor: Advanced | Communication Allocation
Replaces PakBusNodes. Specifies the amount of memory that the CR3000 allocates for maintaining
PakBus routing information. Represents roughly the maximum number of PakBus nodes that the
CR3000 tracks in its routing tables. Default =
50, which is normally enough. Can probably be
reduced in small networks to free memory.