Campbell CR3000 Micrologger, Operator'S Manual

Page: 440 / 644

Section 8. Operation
440
Keyboard display security bypass does not allow comms access without first
correcting the security code.
8.7.3 Passwords
Passwords are used to secure IP based communications. They are set in various
comms schemes with the .csipasswd file, CRBasic PakBus instructions, CRBasic
TCP/IP instructions, and in CR3000 settings.
8.7.3.1 .csipasswd
The .csipasswd file is a file created and edited through DevConfig
(p. 113),
and
which resides on the CPU: drive of the CR3000. It contains credentials
(usernames and passwords) required to access datalogger functions over IP
comms. See CRBasic Editor Help subject Web Service API
for details
concerning the .csipasswd file.
8.7.3.2 PakBus Instructions
The following CRBasic PakBus instructions have provisions for password
protection:
•
ModemCallBack()
•
SendVariable()
•
SendGetVariables()
•
SendFile()
•
GetVariables()
•
GetFile()
•
GetDataRecord()
8.7.3.3 TCP/IP Instructions
The following CRBasic instructions that service CR3000 IP capabilities have
provisions for password protection:
•
EMailRecv()
•
EMailSend()
•
FTPClient()