Campbell Hausfeld HV2000 Series, Operating Instructions And Parts Manual

Page: 3 / 16

3
www.campbellhausfeld.com
Maintenance
Be sure the air filter is clean. A dirty air filter restricts air flow
and can cause the motor to overheat.
iMpoRtant: Keep the unit at the maximum distance from the
spray area to extend filter life.
Model HV2000
1. Remove the filter grille thumbscrew with a screw driver to
access the filter (See Figure 3).
2. Clean the filter with mild soapy water and pat dry.
3. Replace filter if built-up with paint.
Model HV2500 and HV3000
1. Squeeze and pull to remove both filters (See Figure 4).
2. Clean the filter with mild soapy water and pat dry or replace
filter if built-up with paint.
3. Squeeze and tuck to install filter.
HV2000 and HV3000 series
1
3
2
3
4
1
2
Model HV2000 Models HV2500 oR HV3000
Filter
Housing
Thumbscrew
figure 3 figure 4
Replacement parts list
Ref
no.
part number for Model number
description HV2000 HV2500 HV3000 Qty
1 Filter MP302100AJ — — 1
Filter pack — HV012600AJ HV012600AJ 2
2 Hose 15 ft. MP310600AJ — — 1
Hose 25 ft. — HV012500AJ HV012500AJ 1
3 Quick connect coupler HV002200AV HV002200AV HV002200AV 1
4 Stub hose — HA222503AV HA222503AV 1
accessories
Ref
no.
description part number Qty
1 5 ft. Whip Hose (Use with any model) HV012400AJ 1
2 Multi-Purpose Case HV7008 1
3 Gun for models HV2002, HV2500, HV3000 MP331100AJ 1
4 Gun for models HV3500, HV2550 HV7000 1
troubleshooting chart
symptom possible cause(s) corrective action
Poor air flow 1.Hose restricted or kinked 1.Keep air hose straight
2. Restricted filter 2.Clean or replace filter
Unusual grinding noise Damaged turbine motor Contact Service Center
for information about this product
call 1-800-626-4401