Actiheart Guide to Getting Started 5.1.11 (Feb 2020)
17
6.0
Setting up a User in the Database
Once the subject has been fitted with ECG pads and before a recording is started
it is necessary to set up the user in the selected database. A user can be set up
in any of the recording modes but prior to commencing any important recording it
is recommended that the level of signal being picked up by the unit is checked by
recording a short signal test, so this is usually the most appropriate place to set
up a new user.
After opening the main menu of the Actiheart software, click on the “Signal Test”
button. This brings up the screen shown below:
Clicking the "Setup" button then produces the following screen:
Clicking ‘Find’ allows the settings for an existing user to be retrieved.
Clicking ‘Add New’ allows the details for a new user to be added.
6.1 Selecting an
existing User from
the Database
If the user is already present
in the selected database, selecting ‘Find’ will
produce the following screen:
