2
Operating instructions V604s Be
Camille Bauer
Operating instructions
Programmable multifunctional transmitter SINEAX V604s
First read, then …
The unobjectionable and safe operation pre-
supposes that these operating instructions
have been read and understood!
Devices may only be disposed of in a pro-
fessional manner!
Contents
1. Functional description
................................................. 2
2. Connection to a PC and communication via
CB-Manager
................................................................ 2
3. Block diagram
.............................................................. 3
4. Technical data
.............................................................. 4
5. Signal fl ow ................................................................... 7
6. Modbus interface
......................................................... 8
6.1
EIA-RS-485
Standard
........................................... 8
6.2 Coding and addressing ........................................ 8
6.3
Mapping
............................................................... 9
6.4
Device
identifi cation ............................................. 9
6.5
Measured
values
................................................ 10
6.6
Confi guration parameters .................................. 11
7. Electric connections
.................................................. 17
8. Dimensional drawing
................................................. 19
9. Accessories
............................................................... 19
10. Conformity declaration .............................................. 19
1. Functional description
V604s is a multifunctional transmitter for top-hat rail assem-
bly with the following main characteristics:
●
Measurement of DC voltage, DC current, temperature
(RTD, TC) and resistance
●
Sensor connection without any external jumpers
●
2 inputs (e.g. for sensor redundancy or difference
formation)
●
2 outputs (U and/or I)
●
2 inputs can be linked with each other and allocated
to the 2 outputs which enables calculations and
sensor monitoring (e.g. prognostic maintenance of
sensors)
●
System capability: Communication via Modbus
interface
●
Freely programmable relay, e.g. for limit or alarm sig-
nalling
●
AC/DC wide-range power supply unit
●
Pluggable high-quality screw terminals
All settings of the instrument can be adapted to the measur-
ing task by PC software. The software also serves visualising,
commissioning and service.
2. Connection of SINEAX V604s to a PC and communication via CB-Manager.
V604s communicates with a PC (CB-Manager) via an RS
232/RS485 interface and a MODBUS protocol.
Select the following settings in this respect:
Select the RS 232/ RS485 interface under Options / Inter-
face.
This is also applicable if an RS485/USB converter is used
and the converter is connected to the computer via the
USB connection.
Subsequently, enter the following settings under Options /
Interface / Settings:
