p.
1
8
1
8
- M
anu
al
:
F
A
0
11
3
0
-E
N
F
A
0
113
0
-E
N
- 0
4
/2
0
18 - © C
A
M
E S
.p
.A
. - T
hi
s manu
al
's
c
onte
nts ma
y b
e e
d
ite
d at any time with
out n
oti
ce
.
Time settings menu
[TIMING ADJ.]
[A.C.T.]
[
0 s]
⇨
[120 s]
The wait before the automatic closing starts when the opening end point is reached, and can be adjusted to between 1 s and 120 s. The auto-
matic closing does not turn on if any of the safety devices trigger when an obstruction is detected, after a total stop or during a power outage.
[Cycle time]
[
10 s]
⇨
[120 s]
Gearmotor working time during opening and closing. The operating time can be adjusted to between 10 s and 120 s
[Prefl ashing T.]
[
1 s]
⇨
[10 s]
After and opening or closing command, the flashing light connected to E-EX, flashes from between 1 and 10 seconds before starting the
maneuver.
[Partial A.C.T.]
[
0 s]
⇨
[120 s]
Gate's waiting time after a partial opening command. The waiting time can be set from0 s to 120 s.
Users Menu
[RADIO USRS]
[New user]
[2-7 Function] / [Only open] / [Partial]
Entering up to 250 users and associating to each one a function of choice among those included. Enter by using a transmitter or other control
device (see the ENTERING A NEW USER paragraph).
[Modify user]
To edit the function associated to the user
(see EDIT USER paragraph)
.
[Remove Usr.]
To remove a user. Confi rm removal with ENTER.
[Backup data]
To save system users and settings in Memory Roll. Confi rm saving with ENTER.
[Restore backup]
For uploading the data saved in the memory roll onto the electronic board.
If the boards feature different versions, you may only upload the users.
[Delete all usr]
To remove all users. Confirm removal with ENTER.
Users Menu
[ADJUSTMENTS]
[Gate run adj.]
Automatic calibration of the gate-leaf run (see the GATE RUN ADJUSTMENTS paragraph).
[Slowdown]
[0%]
⇨
[40%]
Adjusting the slow-down starting point before the limit-switch (when opening and closing).
The slow-down starting point is calculated as a percentage (from 0% to 40% of the complete gate travel).
[Slowdown spd.]
[ON] / [OFF]
Activating the slow-down speed (when opening and closing).
[Gate run sens.]
[-
+
]
Obstruction detection sensitivity during gate run (both opening and closing).
[Slowdown sens.]
[-
+
]
Obstruction detection sensitivity during slow-down (both opening and closing).
