These instructions are intended for professional garage door
installers. All references are taken from inside looking out.
Smart Phone Control Kit
Doc # 161056_01
Part # 86958
Released 19/11/19
Smart Hub Installation Instructions
CAD Secure (SDO-6) & PanelMax (SDO-8)
NETWORK SMART HUB KIT - ORDER NO. 86957
ITEM
DESCRIPTION
QTY
1
WIRELESS HUB100 WT B&D
1
2
POWER SUPPLY AU 240V
1
3
WALL BRACKET HUB100
1
4
PLASTIC WALL PLUG 6.9 X 25
2
5
SELF TAPPING SCREW 6 X 25
2
6
NETWORK TRANSCEIVER MODULE
1
7
HARNESS 4 CORE 275 ASSY
1
Garage Door Openers
Important Safety Instructions
WARNING!
• DO NOT attempt to disassemble, repair or modify the product. This will
invalidate the warranty.
• DO NOT install product on openers that control J-Type or Single Piece Doors.
• Do not allow children to play with the Smart Hub or your smart phone if the
B&D phone app has been installed.
ELECTROCUTION!
• Keep the device away from water and other liquids. In the event that water
or other liquids enter the device, power off he product immediately and
clean the device.
• To reduce the risk of fire or electric shock, do not expose this device to rain or
moisture. The device should not be exposed to dripping or splashing.
• DO NOT remove the cover as there are no user-serviceable parts inside.
CAUTION:
Fall from ladder
• Ensure ladder is the correct type for job.
• Ensure ladder is on flat ground.
• Ensure user has 3 points of contact while on ladder.
Burns
• DO NOT handle damaged or leaking batteries
This device allows for operation of the door when not in line-of-sight of the door and
opener.
The door may operate unexpectedly,
therefore do not allow anything to stay in or near the
path of the door. When the door is not operating automatically, watch the door when it is
moving and keep people away until the door is completely opened or closed.
Contact with
the moving door can cause serious personal injury or damage to property.
It is our strong recommendation that your opener be fitted with
SAFETY BEAMS.
Safety
Beams detect any obstructions in the doors path and override automatic operation if
one presents. These must be installed as in accordance with AS/NZS 60335-2-95:2012.
This is in addition to regular professional servicing, and monthly obstruction tests as detailed
in your opener’s Home Owners Manual.
This device must be connected to power at all times.
DO NOT disconnect power after setup.
