5
PARTS DESCRIPTION
SCALE SECTION
The scale section attaches to the lift truck carriage and you will install your
existing forks to the front of it. The scale section detects the weight of the load.
The weight of the load is then sent to the
CSW-10AT-LFT
Meter through the signal
cable.
CSW-10AT-LFT METER
The CSW-10AT-LFT Meter converts the weight from the scale section into
an accurate digital weight and displays it. Additionally, the
CSW-10AT-LFT
sends data/information to peripheral devices. Mounting hardware is also
provided for the CSW-10AT-LFT so that it may be mounted to your fork truck
in either the dash mount or overhead mount.
UNPACKING YOUR SCALE
Your CAMBRIDGE Lift Truck Scale is shipped on a pallet. A Lift Truck Scale
system includes the following components:
1)
One Scale Section to attach to the forklift carriage with bottom cleats.
2)
One Signal Cable (coil).
3)
One Power Cable.
4)
One Electronic Meter (
CSW-10AT-LFT
) with mounting hardware.
5)
One Cable Protection Guard - attached to the scale section.
6)
Ten 5 1/2 inch wire ties.
7)
Ten 21 inch wire ties.
Upon receipt of your scale system, please inspect to make sure the above parts
are present in your shipment.
Summary of Contents for DL-CSW-10AT-LFT
Page 1: ......
