Cambium Networks PMP 450 Series, Installation Manual

Page: 58 / 292

Chapter 2: System hardware 58
PMP/ PTP 4 50 Series int erfaces - AP
The PMP 450 Series - AP interfaces are illustrated below.
Figure 8 : PMP/PTP 450 Series - AP interfaces
Table 32 :PMP/PTP 450 Series - AP interface descriptions and cabling – 2.4 GHz and 5 GHz
Interface Function Cabling
PSU/Ethernet Power-over-Ethernet, Ethernet communications
(management and data) RJ45 Cable
Sync/Default GPS synchronization signaling, provides power to UGPS
module. Default plug port. RJ11 cable, default
plug.
RF Port A 2.4
GHz -45 degree RF connection to AP antenna 50 ohms RF cable,
N-type
5
GHz Vertical RF connection to AP antenna
RF Port B 2.4
GHz +45 degree RF connection to AP antenna 50 ohms RF cable,
N-type
5
GHz Horizontal RF connection to AP antenna
Ground Lugs For grounding the unit 10 AWG copper
wire
PMP/ PTP 4 50 Series int erfaces – SM/ BH
The PMP 450 Series SM/BH interfaces are illustrated below.