Cambium Networks PMP 450 Series, Installation Manual

Page: 113 / 292

Chapter 2: System hardware 113
Product Power/Injector Module Sync
PMP/ PTP 450b Yes/29 V Yes
PMP 450/PTP 450 Yes/29 V Yes
PMP 100/PTP 100 Yes/29 V Yes
CMM5 Sp ecif icat ions
The following table provides specifications for the CMM5 Power & Sync Injector (56 Volts).
Table 87 :CMM5 Specifications
CMM5 Power and Sync Injector 56 Volts
Model Number C000000L556B
Data Interface 4 each RJ45 Gigabit Powered output ports “To Radios”
4 each RJ45 Gigabit Data input ports “To Switch Array”
1 each GPS timing port (RJ-12)
1 each CMM5 USB Serial port for local administration
1 each RJ12 Daisy Chain port “IN”
1 each RJ12 Daisy Chain port “OUT”
Surge Suppression Lightning Suppression for each “To Radios” RJ45 Port
Power Input Voltage: + or - 48 V DC
Input Power Consumption: 400 watts
Output Voltage: + or - 55 V DC
Output Current: 0 - 1.8 A per channel
Output Power: 0 - 90 Watts per channel
Cabinet Temperature -40° C to +55° C (-40° F to +131° F), 90% humidity, condensing
Physical Max Distance from Managed Radios: 328 cable feet (100m)
Max Distance to GPS Antenna: 100 cable feet (30.5m)
Dimensions 8.85” W x 15.75” D x 1.65” H (225mm x 400mm x 42mm)
Unit Weight 6.6 pounds (3kg)
Power Interface Terminals 2 Power input ports for 48 V DC Power (Power supplies sold separately)
Note
DC Power Input requirement is +/- 48 V DC and must not exceed 100 V surges. If
surges above 100 V DC are expected, a suitable in-line DC surge suppressor with
48 V DC nominal voltage is required.