58
Appendix
In order for SONAR 8 to communicate with the VS-700C console and Fantom VS Editor, you must enable and assign
the VS-700 MIDI ports in SONAR.
1.
On SONAR’s “Options” menu, click “MIDI Devices” to open the “MIDI Devices” dialog.
2.
In the “Inputs” and “Output lists”, select both “IO MIDI (VS-700)” and “FANTOM VS (VS-700).”
1.
On SONAR’s “Options” menu, click “Controllers/Surfaces” to open the “Controllers/Surfaces”
dialog.
2.
Click the [Add Controller/Surface] button
to open the “Controller/Surface Settings” dialog.
3.
In the “Controller/Surface” box, select “VS-700.”
4.
Assign both “Input Port” and “Output Port” to “CONSOLE (VS-700).”
5.
Click [OK] to close the “Controller/Surface Settings” dialog.
1.
In Fantom VS Editor, click the [SETUP] menu button
and select “Set Up MIDI Devices” to
open the “Set Up MIDI Devices” dialog.
For information on how to insert the Fantom VS Editor VSTi synth, refer to the SONAR VS-700 Owner’s Manual.
2.
In the “Fantom VS Editor Input/Output” lists, choose “Fantom VS” and click [OK].
Configuring VS-700 MIDI Ports
To Enable VS-700 MIDI Ports in SONAR
To Configure SONAR VS-700 Control Surface Plug-in
To Configure Fantom VS Editor
VS-700_Install_e.book 58 ページ ２００８年１１月２０日 木曜日 午後５時６分
