55
Troubleshooting
If problems occur more frequently with large (heavy) projects
Increase the Mixing Latency
Extremely short Mixing Latency settings may place an excessive load on your computer.
Use freezing or bouncing to reduce the load on your computer
If the size of the project exceeds the processing capability of your computer, you can reduce the processing load by
freezing synthesizers or bouncing audio tracks.
Update the driver of your audio device
In most cases, newer driver versions of the audio interface will have fewer problems and improved performance.
Close other programs
If other programs are running, they will reduce the CPU resources and memory that are available to SONAR. It is best
to close all programs that are not needed for your work.
Change the VS-700 driver’s buffer size
In some cases, reducing the VS-700 driver’s buffer size may allow stable operation even with a shorter Mixing
Latency.
1.
Before you change the driver settings, you must close all programs that are using the VS-700. This
is not necessary if you’re merely viewing the settings.
2.
Open the “Control Panel” and click “VS-700.”
* If you don’t see the above icon, click
“Switch to classic view.”
The
“VS-700 Driver settings”
dialog box will appear.
3.
Adjust the “Audio Buffer Size.”
To change the setting, make the desired setting and click [OK]. If you merely want to view the setting without
changing it, be sure to click [Cancel] after you’ve noted the setting.
* Execute SONAR’s
“Wave Profiler...”
if you’ve changed the buffer size (unless you’re using ASIO mode).
VS-700_Install_e.book 55 ページ ２００８年１１月２０日 木曜日 午後５時６分
