10
Installation and Registration
12.
Perform the following procedure before you connect the VS-700 to your computer.
Due to a circuitry-protection feature, the VS-700R requires a few moments after power-up before it is ready
for normal operation.
Minimize the volume of the connected monitor speakers or external amp, and then connect the VS-700R to
your computer. Even if the volume is minimized, some noise may be audible when you make connections, but
this does not indicate a malfunction.
The system may not be recognized correctly if you connect to a USB hub. If so, connect directly to a USB
port on your computer.
1.
Use the dedicated connection cable (included) to connect the VS-700C and VS-700R.
fig.VS-700-connect01e.eps
2.
Set the VS-700R’s [SAMPLE RATE] knob to 44.1.
fig.VS-700-connect02e.eps
3.
Minimize the VS-700C’s [AUDIO OUTPUT] knobs (three knobs).
fig.VS-700-connect03e.eps
VS-700C Rear Panel
VS-700R Rear Panel
Dedicated connection
cable (included)
VS-700R Front Panel
VS-700_Install_e.book 10 ページ ２００８年１１月２０日 木曜日 午後５時６分
