ENCORE VENTI Rev. 3 2021-10
www.cafection.com 800-561-6162
28
SERVICE & INSTALLATION MANUAL for Cafection's Encore Venti
In
it
ia
l S
e
tu
p
4.14 Installation Verification
It is important to perform several brew cycles on the equipment before completing the installation. At
least two (2) cups of each product selection should be ordered to ensure that the brewer is operating
as per the specifications laid out in this manual. During this process, review the following checklist as a
reminder. Make sure that the brewer is clean, safe and functioning once it is ready to be left on-site.
What to verify
Inlet valve is free of leaks.
Verify that it is secured and not overtightened.
Brew chamber is empty of coffee.
Verify that the unit is leveled.
Filter paper feeds without resistance and goes
straight into the waste bin.
Verify that the chute is properly installed.
Repeat the installation procedure if needed.
Soluble mixing bowl is free of leaks.
Verify that it is installed straight and that the
tube is secured.
Water temperature is acceptable.
Verify water temperature.
Products are loaded.
Load products.
Brewer and area are clean and tidy.
Clean and tidy up.
4.15 Coin Changer and Bill Acceptor
The Encore Venti software and hardware are tested and developed using CoinCo products.
Cafection recommends using the same brand for complete compatibility.
The following models have been tested and work with the Encore Venti:
- MDB Coin acceptor 9300GX
(American coins)
- MDB Coin acceptor 9300CGX
(Canadian coins)
- MDB Bill reader Bill Pro BP4-CRX6U
- MDB Coin acceptor Guardian 6000
- MDB Bill reader Bill Pro BP4SX (American bills
only)
Every bill inserted will be automatically placed into the bill stack, allowing the customer to insert
multiple bills in a single transaction. That is why a customer cannot cancel the transaction and
have the bill returned. If the transaction is canceled, the value of the bill inserted will be refunded in
coins. Bills with a maximum value of $10 are accepted. Higher value bills will be returned.
The brewer must be equipped with a functional coin changer in order for the bill acceptor to work
properly. A bill will only be accepted if the coin changer contains at least the same value in coins in
its tubes.
The coin changer issues coins of $0.05 or more. When setting products selling
prices, make sure to set amounts ending with a 5 or 0. For example, if a product
is sold at $1.98 and the customer inserts $2, the coin changer will not be able to
return the $0.02 due. The right selling price should therefore be set to $1.95 or
$2.00.
