background image

ENCORE VENTI   Rev. 3  2021-10

41

www.cafection.com      800-561-6162

SERVICE & INSTALLATION MANUAL for Cafection's Encore Venti

S

e

rv

ic

e Mo

d

e

6.5.3   Brew Cycles Settings Sub Tab

1.  This table is used to set the brew 

cycles and extra grind time. Press 
on the quantity to modify it and enter 
the desired number of units using the 
numeric keyboard.

2.  This button is used to set all brew 

cycles values back to factory settings.

3.  These buttons are used to discard or 

save any current modification.

The Encore Venti has 4 different brew cycles. The brew cycle is automatically selected in 
accordance with the coffee and water quantities in the coffee-based recipe.

Standard (101 to 187 water units)

Standard brew cycle.

Swirling (188 to 269 water units)

Three (3) swirling cycles when the total quantity of water is dispensed in 3 shots. The mix is 
stirred 3 times, ensuring that the coffee completely comes into contact with water. Ideal for 
recipes with high water and coffee volumes.

Double (270 water units and more)

Double brew cycle. The machine splits the water and ingredients quantities in half to 
perform 2 separate brew cycles.

Fast (100 water units or less)

Quick brew cycle. Ideal for recipes with low water level.

Adjustable Settings

Extra Grind Time

The grind time is automatically calculated in accordance with the quantity of coffee grounds 
set in the recipe. Older grinders might not grind all the beans. Therefore, extra grind time 
may be added using these fields. 

20 units = 1 second. Default setting: 0.

Pause 1

First contact time between water and coffee grounds. To get more extraction, increase this 
value. 

20 units = 1 second.

Pause 2

Second contact time between water and coffee grounds. To get more extraction, increase 
this value. 

20 units = 1 second.

Move 3

Position where the piston stops before dispensing the coffee into the cup.

This setting must be changed with care.

A setting too high will prematurely open the brew chamber, causing a mess of wet 

coffee grounds inside the machine. 

A setting too low will not pull all the coffee through the filter.

1

3

2

Summary of Contents for Encore VENTI
























































































Reviews: