Cadillac 2016 ELR Owner'S Manual Download Page 261

Page: 261 / 368

Cadillac ELR Owner Manual (GMNA-Localizing-U.S/Canada-9087644) -

2016 - crc - 4/20/15

260

Vehicle Care

License Plate Lamp

Lamp Assembly

Bulb Assembly

1. Bulb Socket

2. Bulb
3. Lamp Assembly

To replace one of these bulbs:

1. Push the lamp assembly (3)

toward the right.

2. Pull the lamp assembly down

to remove.

3. Turn the bulb socket (1)

counterclockwise to remove it
from the lamp assembly (3).

4. Pull the bulb (2) straight out of

the bulb socket (1).

5. Push the replacement bulb

straight into the bulb socket
and turn the bulb socket
clockwise to install it into the
lamp assembly.

6. Push the lamp assembly back

into position until the release
tab locks into place.

Replacement Bulbs

Lamp

Bulb

Number

Back-Up Lamp

921 (W16W)

License
Plate Lamp

W5W LL

For replacement bulbs not listed
here, contact your dealer.

Summary of Contents for 2016 ELR

















































































































































































































































































































































































Search results

Summary of Contents for 2016 ELR

Reviews:

Related manuals for 2016 ELR

Brands by name

Popular brands

Cadillac 2016 ELR, Owner'S Manual

Search results

Summary of Contents for 2016 ELR

Reviews:

Related manuals for 2016 ELR

Brands by name

Popular brands