Cadillac 2016 ELR Owner'S Manual Download Page 108

Page: 108 / 368

Cadillac ELR Owner Manual (GMNA-Localizing-U.S/Canada-9087644) -

2016 - crc - 4/20/15

Instruments and Controls

107

the instrument cluster. The tutorials
are only available when the vehicle
is in P (Park).

Open Source Software :

Press

SEL while Open Source Software is
highlighted to display open source
software information.

Speedometer

The speedometer shows the
vehicle's speed in either kilometers
per hour (km/h) or miles per
hour (mph).

Odometer

The odometer shows how far the
vehicle has been driven, in either
kilometers or miles.

Trip Odometer

The trip odometer shows how far
the vehicle has been driven since
the trip odometer was last reset.

The trip odometer is accessed and
reset through the Driver Information
Center (DIC). See

Driver

Information Center (DIC)

131

Battery Gauge (High
Voltage)

This gauge shows the high voltage
battery charge level.

The arrow next to the battery
symbol points to the side of the
vehicle the charge port is on.

See

Electric Mode

185

Fuel Gauge

When the ignition is on, the fuel
gauge indicates about how much
fuel is left in the tank.

There is an arrow near the fuel
gauge pointing to the side of the
vehicle the fuel door is on.

When the indicator nears empty, the
low fuel light comes on. There still is
a little fuel left, but the vehicle
should be refueled soon.

Summary of Contents for 2016 ELR

















































































































































































































































































































































































Search results

Summary of Contents for 2016 ELR

Reviews:

Related manuals for 2016 ELR

Brands by name

Popular brands

Cadillac 2016 ELR, Owner'S Manual

Search results

Summary of Contents for 2016 ELR

Reviews:

Related manuals for 2016 ELR

Brands by name

Popular brands