Cadillac 2016 ELR Owner'S Manual Download Page 260

Page: 260 / 368

Cadillac ELR Owner Manual (GMNA-Localizing-U.S/Canada-9087644) -

2016 - crc - 4/20/15

Vehicle Care

259

Headlamp Aiming

Headlamp aim has been preset and
should need no further adjustment.

If the vehicle is damaged in a crash,
the headlamp aim may be affected.
If adjustment to the headlamps is
necessary, see your dealer.

Bulb Replacement

For the proper type of replacement
bulbs, see

Replacement Bulbs

260

For any bulb-changing procedure
not listed in this section, contact
your dealer.

LED Lighting

This vehicle has several LED lamps.
For replacement of any LED lighting
assembly, contact your dealer.

Back-Up Lamps

1. Back-Up Bulb Socket

2. Back-Up Lamp Assembly

To replace one of these bulbs:

1. Reach under the rear fascia

and locate the back-up lamp
assembly.

2. Remove the bulb socket (1) by

turning counterclockwise and
pulling straight out of the lamp
assembly (2).

3. Pull the bulb out of the socket.

4. Install the new bulb in the bulb

socket.

5. Install the bulb socket by

turning clockwise.

Summary of Contents for 2016 ELR

















































































































































































































































































































































































Search results

Summary of Contents for 2016 ELR

Reviews:

Related manuals for 2016 ELR

Brands by name

Popular brands

Cadillac 2016 ELR, Owner'S Manual

Search results

Summary of Contents for 2016 ELR

Reviews:

Related manuals for 2016 ELR

Brands by name

Popular brands