Cadillac 2016 ELR Owner'S Manual Download Page 21 | Manualshive

Page: 21 / 368

background image

Cadillac ELR Owner Manual (GMNA-Localizing-U.S/Canada-9087644) -

2016 - crc - 4/20/15

20

In Brief

vehicle. This can help avoid or
lessen the severity of crashes when
driving in a forward gear.

See

Front Automatic Braking (FAB)

System

0

215

.

Lane Departure
Warning (LDW)

LDW may help avoid unintentional
lane departures at speeds of
56 km/h (35 mph) or greater. LDW
uses a camera sensor to detect the
lane markings. The LDW light,

@

, is

green if a lane marking is detected.
If the vehicle departs the lane, the
light will change to amber and flash.
In addition, the driver seat will pulse
or beeps will sound.

See

Lane Departure Warning (LDW)

0

219

.

Lane Change Alert (LCA)

If equipped, the LCA system is a
lane-changing aid that assists
drivers with avoiding lane change
crashes that occur with moving
vehicles in the side blind zone (or
spot) areas or with vehicles rapidly

approaching these areas from
behind. The LCA warning display
will light up in the corresponding
outside side mirror and will flash if
the turn signal is on. The Side Blind
Zone Alert (SBZA) system is
included as part of the LCA system.

See

Side Blind Zone Alert (SBZA)

0

216

and

Lane Change Alert (LCA)

0

217

.

Rear Vision
Camera (RVC)

RVC displays a view of the area
behind the vehicle on the center
stack display when the vehicle is
shifted into R (Reverse).

See

Assistance Systems for Parking

or Backing

0

210

.

Rear Cross Traffic Alert
(RCTA) System

If equipped, the RCTA system uses
a triangle with an arrow displayed
on the RVC screen to warn of traffic
behind your vehicle that may cross

your vehicle's path while in
R (Reverse). In addition, beeps will
sound, or the driver seat will pulse.

See

Assistance Systems for Parking

or Backing

0

210

.

Parking Assist

Front and Rear Parking Assist
(FRPA) uses sensors on the front
and rear bumper to assist with
parking and avoiding objects.
It operates at speeds less than
8 km/h (5 mph). FRPA may display a
warning triangle on the Rear Vision
Camera screen and a graphic on
the instrument cluster to provide the
distance to an object behind the
vehicle. In addition, multiple beeps
or seat pulses may occur if very
close to an object.

See

Assistance Systems for Parking

or Backing

0

210

.

Power Outlets

The accessory power outlets can be
used to plug in electrical equipment,
such as a cell phone or MP3 player.

«
...
19
20
21
22
23
...
»

Summary of Contents for 2016 ELR

















































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 ELR

Brand: VanEssa mobilcamping Pages: 8

Brand: Jetter Pages: 4

Brand: K&K Pages: 8

Brand: K&K Pages: 20

Brand: K&K Pages: 6

Brand: K&K Pages: 3

Brand: K&K Pages: 3

Brand: Conrad Pages: 26

2003 Thunderbird

Brand: Ford Pages: 200

AAB-P-RZR900-K2-001

Brand: SuperATV Pages: 3

Lippert Components LEVELEGS MPD 66385

Brand: Atwood Pages: 6

65 41 2 152 528

Brand: BMW Pages: 21

Chevrolet Silverado 2500HD 2021

Brand: GMC Pages: 433

Brand: Actia Pages: 102

DELTA DL FIX 209FP

Brand: Menabo Pages: 8

Brand: Porsche Pages: 313

Brand: STARLANE Pages: 24

Brand: Hudson Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands