Cadillac 2016 ELR Owner'S Manual Download Page 324

Page: 324 / 368

Cadillac ELR Owner Manual (GMNA-Localizing-U.S/Canada-9087644) -

2016 - crc - 4/20/15

Service and Maintenance

323

Maintenance Schedule
Additional Required
Services - Severe

000

km/7,500

000

km/15,000

000

km/22,500

000

km/30,000

000

km/37,500

000

km/45,000

000

km/52,500

000

km/60,000

108

000

km/67,500

120

000

km/75,000

132

000

km/82,500

144

000

km/90,000

156

000

km/97,500

168

000

km/105,000

180

000

km/1

12,500

192

000

km/120,000

204

000

km/127,500

216

000

km/135,000

228

000

km/142,500

240

000

km/150,000

Rotate tires and perform Required Services.
Check engine oil level and oil life percentage.
Change engine oil and filter, if needed.

Replace passenger compartment air filter. (1)

Inspect evaporative control system. (2)

Replace engine air cleaner filter. (3)

Change electric drive unit fluid.

Replace spark plugs. Inspect spark plug wires.

Replace Master Service Disconnect (MSD).

Drain and fill engine, power electronics, and high
voltage battery cooling systems. (4)

Visually inspect accessory drive belts. (5)

Footnotes

—

Maintenance

Schedule Additional Required
Services - Severe

(1)

Or every two years, whichever

comes first. More frequent
replacement may be needed if the
vehicle is driven in areas with heavy
traffic, areas with poor air quality,
or areas with high dust levels.

Replacement may also be needed if
there is a reduction in air flow,
excessive window fogging, or odors.

(2)

Check all fuel and vapor lines

and hoses for proper hook-up,
routing, and condition.

(3)

Or every four years, whichever

comes first. If driving in dusty
conditions, inspect the filter at each
oil change or more often as needed.

Summary of Contents for 2016 ELR

















































































































































































































































































































































































Search results

Summary of Contents for 2016 ELR

Reviews:

Related manuals for 2016 ELR

Brands by name

Popular brands

Cadillac 2016 ELR, Owner'S Manual

Search results

Summary of Contents for 2016 ELR

Reviews:

Related manuals for 2016 ELR

Brands by name

Popular brands