Cadillac 2016 ELR Owner'S Manual Download Page 147

Page: 147 / 368

Cadillac ELR Owner Manual (GMNA-Localizing-U.S/Canada-9087644) -

2016 - crc - 4/20/15

146

Instruments and Controls

complete stop behind another
stopping vehicle, and then that
vehicle drives on.

Press Go Notifier. Press to select
Off or On. See

Adaptive Cruise

Control

202

Side Blind Zone Alert

This allows the Side Blind Zone
Alert feature to be turned on or off.

Press Side Blind Zone Alert. Press
to select Off or On. See

Side Blind

Zone Alert (SBZA)

216

Comfort and Convenience

Select and the following may
display:

Auto Memory Recall

Easy Exit Options

Chime Volume

Reverse Tilt Mirror

Rainsense Wipers

Auto Memory Recall

This feature automatically recalls
the current driver

’

s previously stored

1 or 2 button positions when
entering the vehicle. See

Memory

Seats

Select Off, On - Driver Door Open,
or On - At ignition On.

Easy Exit Options

This feature automatically recalls
the current driver

’

s previously stored

Exit button position when exiting the
vehicle. See

Memory Seats

Select Off or On.

Chime Volume

This allows the selection of the
chime volume level.

Press + or

−

to adjust the volume.

Reverse Tilt Mirror

This allows the feature to be turned
on or off.

Select Off, On - Driver and
Passenger, On - Driver, or On -
Passenger.

Rainsense Wipers

This allows the feature to be turned
on or off.

Select Off or On.

Energy

Select and the following may
display:

Location Based Charging

Energy Summary Pop-up

Charge Status Feedback

Charge Cord Theft Alert

Charge Power Loss Alert

Location Based Charging

This allows the feature to be turned
on or off. See

“

Location Based

Charging

”

under

Programmable

Charging

121

Select Set Home Location, On,
or Off.

After the home location is set the
title will change to Update Home
Location.

Summary of Contents for 2016 ELR

















































































































































































































































































































































































Search results

Summary of Contents for 2016 ELR

Reviews:

Related manuals for 2016 ELR

Brands by name

Popular brands

Cadillac 2016 ELR, Owner'S Manual

Search results

Summary of Contents for 2016 ELR

Reviews:

Related manuals for 2016 ELR

Brands by name

Popular brands