Cadillac 2016 ELR Owner'S Manual Download Page 150

Page: 150 / 368

Cadillac ELR Owner Manual (GMNA-Localizing-U.S/Canada-9087644) -

2016 - crc - 4/20/15

Instruments and Controls

149

Voice Mail Numbers

This feature displays the voice mail
number for all connected phones.
To change the voice mail number,
touch

and type in a new number,

then touch Save.

Text Message Alerts

This feature will turn text message
alerts on or off. See

“

Text Message

”

under

“

Phone

”

in the infotainment

manual.

Voice

Select and the following may
display:

Confidence Threshold

Prompt Length

Audio Feedback Speed

Display "What Can I Say?" Tips

Confidence Threshold

This feature allows the adjustment
of the sensitivity of the speech
recognition system.

Select Confirm More or
Confirm Less.

Prompt Length

This feature adjusts the voice
prompt length.

Select Short or Long.

Audio Feedback Speed

This feature adjusts the audio
feedback speed.

Select Slow, Medium, or Fast.

Display "What Can I Say?" Tips

This feature gives voice
command tips.

Select Off or On.

Display

Select and the following may
display:

Proximity Sensing

Calibrate Touchscreen

Turn Display Off

Proximity Sensing

When on, certain screen buttons
and features will become visible
when a hand approaches the
screen.

Select Off, On, or On - Map Only.

Calibrate Touchscreen

Select to calibrate the touchscreen,
then follow the prompts.

Turn Display Off

Select to turn the display off. Press
anywhere on the display area or any
faceplate button to turn the
display on.

Rear Camera

Select and the following may be
display:

Guidance Lines

Rear Park Assist Symbols

Guidance Lines

Select to turn Off or On. See

Assistance Systems for Parking or
Backing

210

Rear Park Assist Symbols

Select to turn Off or On. See

Assistance Systems for Parking or
Backing

210

Summary of Contents for 2016 ELR

















































































































































































































































































































































































Search results

Summary of Contents for 2016 ELR

Reviews:

Related manuals for 2016 ELR

Brands by name

Popular brands

Cadillac 2016 ELR, Owner'S Manual

Search results

Summary of Contents for 2016 ELR

Reviews:

Related manuals for 2016 ELR

Brands by name

Popular brands