Cadillac 2016 ELR Owner'S Manual Download Page 206 | Manualshive

Page: 206 / 368

background image

Cadillac ELR Owner Manual (GMNA-Localizing-U.S/Canada-9087644) -

2016 - crc - 4/20/15

Driving and Operating

205

When it is determined that there is
no vehicle ahead inside the selected
following gap, then the vehicle
speed will increase to the set speed.

The speedometer reading can be
displayed in either English or metric
units. See

Instrument Cluster

0

103

.

The increment value used depends
on the units displayed.

Reducing Speed While ACC is at a
Set Speed

If ACC is already activated, do one
of the following:

.

Use the brake to get to the
desired lower speed. Press
SET

–

down and release the

accelerator pedal. The vehicle
will now cruise at the lower
speed.

.

Press and hold SET

–

down until

the desired lower speed is
reached, then release it.

.

To decrease the vehicle speed in
smaller increments, press SET

−

.

For each press, the vehicle goes
to the next 1 km/h or 1 mph
slower mark on the
speedometer.

.

To decrease the vehicle speed in
larger increments, press SET

−

down to the second detent. For
each press, the vehicle speed
decreases to the next 5 km/h or
5 mph mark on the
speedometer.

The speedometer reading can be
displayed in either English or metric
units. See

Instrument Cluster

0

103

.

The increment value used depends
on the units displayed.

Selecting the Follow Distance

When a slower moving vehicle is
detected ahead within the selected
following gap, ACC will adjust the
vehicle's speed and attempt to
maintain the follow distance gap
selected.

Press

[

on the steering wheel to

adjust the following gap. When
pressed, the current gap setting
displays briefly on the instrument
cluster.

Subsequent presses cycle the gap
button through three settings: Far,
Medium, or Near. The gap setting
will be maintained until it is
changed.

Since each gap setting corresponds
to a following time (Far, Medium,
or Near), the following distance will
vary based on vehicle speed. The
faster the vehicle speed, the further
back your vehicle will follow a
vehicle detected ahead. Consider
traffic and weather conditions when
selecting the following gap. The
range of selectable gaps may not be
appropriate for all drivers and
driving conditions.

Changing the gap setting
automatically changes the alert
timing sensitivity (Far, Medium,
or Near) for the Forward Collision
Alert (FCA) feature. See

Forward

Collision Alert (FCA) System

0

213

.

«
...
204
205
206
207
208
...
»

Summary of Contents for 2016 ELR

















































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 ELR

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 2

Brand: Cadillac Pages: 494

Brand: Cadillac Pages: 500

Brand: Cadillac Pages: 40

Brand: Cadillac Pages: 432

Brand: Cadillac Pages: 338

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 438

Brand: CAMPARK Pages: 20

Electronic Parking Disc 3

Brand: Jacob Jensen Pages: 2

Brand: Yakima Pages: 12

Brand: Safe Fleet Pages: 38

Brand: Thule Pages: 12

Brand: AA Products Pages: 6

Brand: Hyundai Pages: 280

Brand: U.S. General Pages: 8

Brand: Thule Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands