Cadillac 2012 Cadillac SRX, Owner'S Manual

Page: 49 / 512

Black plate (17,1)
Cadillac SRX Owner Manual (Include Mex) - 2012
Keys, Doors, and Windows 2-17
Obstacle Detection Features
If the liftgate encounters an
obstacle during a power open
or close cycle, a warning chime
will sound and the liftgate will
automatically reverse direction to
the full closed or open position.
After removing the obstruction,
the power liftgate operation can be
used again. If the liftgate encounters
multiple obstacles on the same
power cycle, the power function
will deactivate. After removing the
obstructions, the liftgate will resume
normal power operation.
The vehicle has pinch sensors
located on the side edges of the
liftgate. If an object is caught
between the liftgate and the body
and presses against this sensor,
the liftgate will reverse direction and
open fully. The liftgate will remain
open until it is activated again or
closed manually.
Setting the Power
Liftgate 3/4 Mode
To change the liftgate stop position.
1. Turn the liftgate switch to
either the MAX, or the 3/4 mode
position and power open the
liftgate.
2. Stop the liftgate movement at
the desired height by pressing
any liftgate switch. Manually
adjust the liftgate position if
required.
3. Press and hold the button on
the liftgate next to the latch
until the turn signals flash and
a beep sounds to indicate that
the new setting is recorded.
When power opened with
the 3/4 mode selected, the liftgate
stops at the new set position.
If you do not receive the audible and
visual feedback when setting the
intermediate stop position, you are
attempting to set the height below
the 3/4 open height minimum
(approximately 1.52 m or 5 ft).
The liftgate cannot be set below
that minimum and the new setting
will not be recorded.